FLOW CONTROL

(Balancing Valves, Coil Kit Products, Accessories)

QUICK REFERENCE PRODUCT GUIDE

CONSOLIDATED PRICE GUIDE

Submittals are in Adobe PDF format, Adobe Acrobat Reader Required!

AFLD is an automatic flow limiting device, male ended x union, rated at 600 WOG.  AFLD is supplied with a stainless steel flow limiting cartridge and dual pressure/ temperature ports.  2 - 60+ PSID

Submittal

AFLB is an automatic flow limiting device, ball valve x union, rated at 600 WOG.  AFLB is supplied with a stainless steel flow limiting cartridge, full port ball valve rated at 600 WOG, and dual pressure/ temperature ports.  2 - 60+ PSID

Submittal

Combination ball valve / venturi flow section with integral union.  Comes standard with pressure/temperature ports and memory stop.  SWT or FPT (ball end) x SWT, FPT, MPT (union end).  High and Low pressure ranges available in ½" & ¾" sizes.  Factory assembled & leak tested.

Submittal

Flow Chart

Venturi flow section with integral union.  Comes standard with pressure/temperature ports.  MPT (run out side) x SWT, FPT, MPT (union end).  High and Low pressure ranges available in ½" & ¾" sizes.

Submittal

Flow Chart

Integral ball valve, wye-strainer and union rated at 600 WOG.  IVY uses a full-port ball valve for on/off service and offers a total of five (5) ¼" taps for accessories to be installed.  A by-pass tap is provided at the forward 12:00 position tapped ½" on ½" through 1" sizes, and ¾" on 1¼" through 2" sizes.

Submittal

600 WOG standard port ball valve with memory stop.  Blow-out proof stem with dual buna o-ring stem seals.  FPT x FPT or SWT x FPT connections available.

Integral Ball Valve, Union rated at 600 WOG.  IBU incorporates a full port ball valve and union providing for three ¼" taps for accessories.  All taps are plugged unless otherwise specified.

Submittal

Ball valve, wye-strainer are rated at 600 WOG.  CBY uses a full port ball valve connected to the strainer with a standard hose nipple.  The strainer has a ¼” tap in the blow down section for a drain with a 20 mesh stainless steel screen. 

Accessory union comes with two ¼"  taps drilled at 90° with plugs installed and tail pieces.  SWT or FPT (ball end) x SWT, FPT, MPT (union end).

Submittal

600 WOG standard port ball valve with blow-out proof stem and dual buna o-ring stem seals.  FPT x FPT or SWT x FPT connections available.

600 WOG brass wye-strainer with 20 mesh ss strainer element.  ¼" plug installed in the blow down section.  FPT x FPT connections available.

AFLW is an automatic flow limiting device, wafer style, with full flange face.  AFLW is supplied with a stainless steel flow limiting cartridge that can be removed for cleaning, inspection and cartridge exchange if needed.

Combination butterfly valve, steel flanged venturi.  Comes standard with pressure/temperature ports.  Connects to standard ANSI 150lb flanges.  Butterfly valve comes standard with infinite position and 10 position memory stop.

Submittal

Flow Chart

Combination butterfly valve, steel flanged venturi.  Comes standard with pressure/temperature ports.  Connects to standard ANSI 150lb flanges.  Butterfly valve comes standard with infinite position and 10 position memory stop.  Use 12" Venturi flow rate on flow chart.

Submittal

Flow Chart

Combination butterfly valve, steel weld venturi.  Comes standard with pressure/temperature ports.  Connects to standard ANSI 150lb flanges.  Butterfly valve comes standard with infinite position and 10 position memory stop.

Submittal

Flow Chart

Combination butterfly valve, steel grooved venturi.  Comes standard with pressure/temperature ports.  Connects to standard ANSI 150lb flanges.  Butterfly valve comes standard with infinite position and 10 position memory stop.

Submittal

Flow Chart

SGVF (2½" - 12")

Steel venturi, flange x groove connections, comes standard with pressure/temperature ports.

Submittal

Flow Chart

Combination butterfly valve, steel grooved venturi.  Comes standard with pressure/temperature ports.  Connections are groove x groove.  Butterfly valve comes standard with infinite position and 10 position memory stop.

Submittal

Flow Chart

Steel venturi, weld end connections, comes standard with pressure/temperature ports.

Submittal

Flow Chart

Steel venturi, grooved connections, comes standard with pressure / temperature ports.

Submittal

Flow Chart

Steel Accessory Flange with Butterfly Valve - Flange x Flange connection.  Comes standard with 2 - ½" taps located at 12:00 & 6:00 positions.  Other configurations and tap sizes can be ordered at an extra charge.  See BFL data sheet for butterfly details.

Steel Accessory Flange, Groove x Flange connection.  Comes standard with 2 - ½" taps located at 12:00 & 6:00 positions.  Other configurations and tap sizes can be ordered at an extra charge.

Steel Accessory Flange, Weld x Flange connection.  Comes standard with 2 - ½" taps located at 12:00 & 6:00 positions.  Other configurations and tap sizes can be ordered at an extra charge.

Steel Accessory Flange, Flange x Flange connection.  Comes standard with 2 - ½" taps located at 12:00 & 6:00 positions.  Other configurations and tap sizes can be ordered at an extra charge.

Butterfly valve, lug style connection.  

Combination butterfly valve, cast iron wye-strainer.  Connects to standard ANSI 150lb flanges.  Butterfly valve comes standard with infinite position and 10 position memory stop.

Cast iron wye-strainer with 150lb flange connections.  Comes with stainless steel filter element.

PT025

pressure / temperature ports, 1/4” nptm, standard length  Submittal

PT025EX

pressure / temperature ports, 1/4” nptm, extended length  Submittal

PT050

pressure / temperature ports, 1/2” nptm, standard length  Submittal

PT050EX

pressure / temperature ports, 1/2” nptm, extended length  Submittal

AV

manual air vent

AVEX

Manual air vent, extended

H1

1/4” hose end drain valve with cap and chain

H1EX

1/4” hose end drain valve with cap and chain, extended

H2

1/2” hose end drain valve with cap and chain

H2EX

1/2” hose end drain valve with cap and chain, extended

H3

3/4” hose end drain valve with cap and chain

H3EX

3/4” hose end drain valve with cap and chain, extended

XH1M, XH2M

Extended Handle Kits for 1/2” & 3/4” Products

XH3M, XH4M

Extended Handle Kits for 1” & 1-1/4” Products

XH5M, XH6M

Extended Handle Kits for 1-1/2” & 2” Products

MS

memory stop for ball valve

MF

mini-valve 1/4” full port, nptf x nptf

MM

mini-valve 1/4” full port, nptf x nptm

M100, M300

differential pressure meter, 0-100” or 300”, 4” face, meter only

MK100, MK300

differential pressure meter, 0-100”, 4” face, meter kit

BK

placing into a plastic bag after kitting

CF

connection fee per extra connection

AF

handling and connection fee for Customer Supplied Products